KD-9619

  Composed of three parts: 

  ① Backing Film

  ② Butyl rubber adhesive

  ③ Release liner

Advantages: 

All kinds of applications in different environments with premium performances.

①: Waterproof, sealed and insulated, can be directly used for base waterproofing.

②: Long service life. Normal glue can only be used for 2-3 years or 5 years at most, but the service life of butyl rubber 9619 can reach 30 years.

③: Low-temperature resistance, normal glue can only reach -3 degrees, but butyl rubber can reach -40 degrees. The highest temperature can reach 140 degrees.

④: Butyl can adhere to various objects, and solve the problem of overlap between different mediums.

⑤: It can be a rolling membrane, which is used for large area waterproofing;  also can be roll tape to meet the needs of leak repair and lap joints.

⑥: Butyl can customize the products you need according to your special requirements.

FEATURES

Mechanical Properties: High strength, high elongation, impact resistance, puncture resistance, scratch resistance.

Adhesive Performance: The polymer self-adhesive film layer has excellent adhesion performance. The pre-laid membrane and the post-cast structure main body form a fully-adhesive waterproof structure without leaving any potential for water leakage.

Aging Resistance: Excellent resistance to UV aging, heat aging, marine environment corrosion resistance, salt alkali resistance, and chloride ion penetration resistance.

Durability: Waterproof membranes can maintain good chemical stability and long service life under common inorganic, organic acid-base, salt, organic solvents and microbial environments.

Eco-friendly: Green building materials, no pollution to the groundwater environment.

APPLICATION REQUIREMENTS

Different types and specifications of butyl tape are selected according to different waterproofing membranes, different construction methods, environmental temperature and humidity, etc. 

Before application, the waterproof layer can be sealed and applied only after the quality of the previous project is qualified. 

The application environment temperature needs to be 5℃~45℃, and corresponding measures should be taken when it exceeds the specified temperature range.

The surface of the base layer must be cleaned and kept dry and free from mud and oil.

STORAGE & TRANSPORTATION

1. It should be stored in a dry and ventilated environment, and the storage temperature should not be higher than 35°C.

2. Keep away from fire, avoid exposure to the sun and rain and avoid contact with volatile solvents. 

3. Store in a flat place.

INSTALLATION GUIDANCE